Honda Africa Twin CRF1000 2017 Owner's Manual page 126

20171109154101_32MKK8000_eng_BOOK Page 126 Thursday, November 09 2017 15:56:56 JST
Rubber seal
Apply a thin coat of engine oil to the
8.
rubber seal of a new oil filter.
Install the new oil filter and tighten.
9.
Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft)
Install new sealing washers onto the drain
10.
bolts. Tighten the drain bolts.
Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft)
Oil filter
Engine Oil Changing Engine Oil & Filter
u
Fill the crankcase with the recommended
11.
oil ( P. 100, P. 192) and install the oil fill
2 2
cap.
Required oil
When changing oil & engine oil
filter:
CRF1000A/A II
4.0 L (4.2 US qt, 3.5 Imp qt)
CRF1000D/D II
4.2 L (4.4 US qt, 3.7 Imp qt)
When changing oil only:
CRF1000A/A II
3.9 L (4.1 US qt, 3.4 Imp qt)
CRF1000D/D II
4.0 L (4.2 US qt, 3.5 Imp qt)
Check the oil level. P. 118
12.
2
Check that there are no oil leaks.
13.
Install the skid plate.
14.
2
P. 115
121