Honda CB1100 2017 Owner's Manual page 105

20161019161055_32MGC6500_eng_BOOK Page 105 Wednesday, October 19 2016 16:12:26 JST
Tyre Puncture Removing Wheels
u
Rear axle shaft
Adjusting bolt
Remove the brake caliper bracket, rear
7.
wheel and side collars.
Support the brake caliper assembly so
u
that it doesn't hang from the brake
hose. Do not twist the brake hose.
Avoid getting grease, oil, or dirt on the
u
disc to pad surfaces.
Do not push the brake pedal while the
u
wheel is removed.
102
CB1100NA
Adjuster
Place your motorcycle on a firm, level
1.
surface.
Support your motorcycle securely and
2.
raise the rear wheel off the ground using
the centre stand or a hoist.
Loosen the rear axle nut, lock nuts and
3.
turn the adjusting bolts so the rear wheel
can be moved all the way forward for
Drive chain
maximum drive chain slack.
Release the rear axle nut/washer.
4.
Pulser ring
Adjusting
plate
Wheel speed
sensor
Adjusting bolt
Lock nut
Rear axle nut/washer