Sunwave Tech. RemoteComm SRC-7000 Software User Manual page 34

SRC-7000 User's Manual
8. Click
A new window opens.
9. Select the first step for your macro. Each step can be any
key that has been programmed into your SRC-7000.
Note:
• You can store up to 60 commands in one macro.
• Each step of your macro can be any one of the keys you have
programmed into your SRC-7000.
• Use the Device View to select the location of the key you require.
• Select the key either by clicking the key in the LCD soft window,
or the icon in the Key View.
10. Set the delay after the step using the delay field.
Note:
You can set the delay between commands using the delay field.
Once you set the delay, the same delay will be inserted between
commands until you change it.
30
to begin creating a new macro.
Device view
LCD soft
Macro Step View