FLIR EM54 Quick Start
FLIR EM54 Quick Start

FLIR EM54 Quick Start

Environmental meter
Hide thumbs Also See for EM54:

Advertisement

Quick Links

Quick Start
FLIR EM54
Environmental Meter

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EM54 and is the answer not in the manual?

Questions and answers

Summary of Contents for FLIR EM54

  • Page 1 Quick Start FLIR EM54 Environmental Meter...
  • Page 2 EM54 - QUICK START Air Temperature, RH, Wet Bulb, Dew Point Modes 1. Long press to switch the meter ON/OFF 2. Short press VEL|TEMP|TYPE-K to step to Air Temperature mode (TEMP). The upper digits show the reading, short press to toggle 3.
  • Page 3: Setup Mode

    Use the arrows to set timer to 5, 10, 15, 20, 25, 30, 40, 60 minutes or OFF 9. Long press the SETUP button to exit the Setup Mode *Note that you can use the arrow buttons immediately after you access the Setup Mode to step through the Setup parameters quickly. EM54-QS-en-US_AA...
  • Page 4: Battery Replacement

    Short press MAX|MIN|AVG to start recording (REC) and to step through maximum, minimum, and average readings. Long press MAX|MIN|AVG to exit. 3-Year Limited Warranty This product is protected by FLIR’s 3-Year Limited Warranty. Visit www.flir.com/testwarranty to read the 3-Year Limited Warranty document.
  • Page 5 Repair, Calibration, and Technical Support https://support.flir.com Publication Identification No.: EM54-QS Release version: Release Date: March 2019 Language: en-US Copyright © 2019 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form www.flir.com EM54-QS-en-US_AA...

Table of Contents