Table of Contents
Advertisement
SX1233SKA
USER GUIDE
6 Registers Display Window
As outlined in Section 4.2.3 the SX1233 GUI has a show registers utility that, when enabled from either
the Menu or Windows toolbar, provides details of the status of all configuration registers that are
documented in the SX1233 datasheet.
Whenever the contents of a register are changed in the main GUI window, the corresponding register
displays the new contents of the register(s), highlighting changed contents in red for a period of
approximately 5 seconds before reverting back to black.
The register window is displayed below in
Figure 30
. It can be noted that in this example, the contents of
RegOpMode at Addr 0x01 have changed to 0x10, indicating that the SX1233 has been set to Receiver
Mode operation.
Figure 30: SX1233 Registers Display Window
Revision 1.0 STD – February 2010
Page 26 of 31
www.semtech.com
© Semtech 2011
Advertisement
Table of Contents
