Table of Contents
Advertisement
2. First Use
2.1.
Connect the SX1280 Development Kit
1.
Plug the mini-USB / USB cable into the mini-USB socket of the SX1280 Development Kit
2.
Plug the mini-USB / USB cable into the USB socket of your PC
The SX1280 Development Kit will power on and connect to your PC.
2.2.
Welcome Display
The welcome screen with the top menu is visible upon power-on.
You can access the following test modes:
-
DEMO Ping Pong
This performs a bidirectional range test between a pair of radio units.
-
DEMO PER
-
This performs a unidirectional packet error rate test between user-defined
Master and Slave units.
-
DEMO Ranging
This performs a ranging test between user-defined Master and Slave units.
Additionally, you can access the Radio Test Modes, which provide access to the basic operating modes of the radio.
The Radio Settings allow you to modify the communication and modem settings used in the demos.
The Utilities menu provides information about the peripherals and version of the installed firmware.
2.3.
How to Navigate with the Touch Screen
In the kit the following conventions are adopted:
-
Menus, functions and configuration of settings are indicated in
-
Data that cannot be modified is indicated in
-
Result data from tests are indicated in
Wireless & Sensing Products
Development Kit User Guide
UG.DEV.SX1280-1.W.APP
Yellow
Rev.1.0
February 2017
Green
White
Figure 3: Welcome Display
5 of 15
Semtech
Advertisement
Table of Contents
