Table of Contents
Advertisement
SX1233SKA
USER GUIDE
Open Config button opens a Windows file dialog box to allow access to a previously saved SX1233SKA
configuration file (.cfg). Note that saved configuration files are designed to be a useful tool for embedded
software development. The file can be opened in any text editor or within a spreadsheet to display the
programmed register name, address and contents, as illustrated below in Figure 9
.
Figure 9: Example Configuration File Text Editor Output
Save Config button saves and will prompt if overwriting an existing configuration file.
Connect / Disconnect button allows the user to manage manually connection and disconnection of the kit.
Reset resets the SX1233 configuration registers to the recommended default values.
Refresh reads the status of all registers.
Register Window Toggle toggles the SX1233 Registers display window and may also be accessed
through the short cut buttons of the Window Toolbar. The register display window indicates the status of
SX1233 configuration registers as detailed in the SX1233 datasheet. Refer to Section 6 for further
information.
IRQ Monitor Toggle toggles the scanning of the status of Irq registers RegIrqFlags1 and RegIrqFlags2 at
addresses 0x27 and 0x28 respectively, and displays the status on the right hand side of the GUI (see
Section 4.6 for further details).
Help provides an online description of GUI commands.
Revision 1.0 STD – February 2010
Page 12 of 31
www.semtech.com
© Semtech 2011
Advertisement
Table of Contents
