Table of Contents
Advertisement
SX1211SK868/915 User Guide
5.4.2
Binary Registers
The user can select a register by clicking on the register's name tab and can select individual bit
settings for a particular SX1211 register. The new settings of the register occur only when Send
Config button is clicked.
RSSI Measurement
The RSSI measurement button is available only if the RSSI is enabled and then the PC-GUI displays
the result of the measurement. The RSSI output is available in two formats, in binary and in
Hexadecimal.
Rev1.1
17 of 30
www.semtech.com
Advertisement
Table of Contents
