Joystick Assembly - Sunrise Medical Quickie P300 User Instruction Manual & Warranty

The remote joystick assembly connects to a
E. JOYSTICK ASSEMBLY
microprocessor, which controls the chair's
performance.The remote box consists of the
following parts:
Use this knob to adjust the maximum
1. Speed Control Knob:
speed of your chair.Turn it counter-clock-
wise to reduce speed; turn it clockwise to
increase speed.
2. Battery Charge Indicator:
• Green lights indicate that batteries are
fully charged.
• Yellow lights indicate that batteries need
recharging.
• When the lights stay in the red band,
the batteries must be recharged.
The on/off switch must be located so it is
3. On/Off Button:
accessible to the rider, but not in a position
that it may be accidently turned off while
the chair is moving.The on/off switch is
located on the rear of the joystick box
when shipped. Ask your authorized supplier
for alternate locations.
4. Joystick:
The joystick controls the direction and
speed of your chair.Turn the chair on and
move the joystick in the direction you
want to go.
• Moving the joystick from the neutral
(center) position disengages the motor
locks, allowing the chair to move.
• The chair will move faster the more
you move the joystick away from neutral.
Note: If your speed becomes hard to manage,
release the Joystick and the chair will come to
a complete stop.
• When you release the joystick it will
return to neutral; the chair will slow to
a stop and the motor locks will reengage.
• We recommend that you switch the
chair off if you stop for any length of
time.This will conserve battery power.
Note: Once the chair stops, switching the
chair off will not affect the motor locks.
Make sure the boot is not torn or cracked
5. Joystick Boot:
(this could allow water or moisture to
enter). If the boot is torn or cracked,
replace it as soon as you can.
930317 Rev. C
X . O P E R A T I N G G U I D E
4
5
1
3
38
2