Advertisement
1-800-227-1592 www.emergencycaller.com
9. You are now finished programming the EC4 Dialer. In order for
the Dialer to monitor your transmitters, it must be in the
"OPERATE" mode.
To do this, press the "M" button on the keypad until the LCD
will display
The dialer will now monitor any alarm activation.
Testing Phone Numbers RECOMMENDED
If you want to view your saved phone numbers, hit the "M"
button on the dialer until the dialer will display:
*Note: If for any reason the Dialer automatically Dials out
without triggering a transmitter, pay close attention to Step 8:
CH 1: N.O./ N.C. You want to set is as N.C. for all EC4
Transmitters.
Advertisement
