Emergency Caller Products EC-4 Programming Quick Reference Manual

1-800-227-1592 www.emergencycaller.com
EMERGENCY CALLER PROGRAMMING QUICK REFERENCE GUIDE
EC-4 base station set up:
1. Plug AC-2P power supply into a 110AC outlet.
2. Plug power cord into top of EC-4 into the 12vdc connection .
Dialer screen will show Not Programmed Press Keypad #1
Add Emergency Phone Numbers to Call:
1. Press 1 to add numbers
2. Press 1 to add phone number #1.
3. Press 2 for no to add pager. Press 1 to add pager number.
4. Add telephone or cell phone number.
This is where you will add your emergency numbers to call for help.
Local number 4445555*
Long distance number 13334445555*
Cell number (local) 4445555PP*
Enter telephone number followed by * to end number entry.
Enter a 1 before all long distance numbers.
Add 2 Pauses (P) behind all cell phone numbers entered to call.
If you enter number wrong you cannot go back. Push * to end
programming that will return you to step #2 to select number to enter.
See Programming guide for pictorial example for each number type,
including pager number set up.