Advertisement
1-800-227-1592 www.emergencycaller.com
LCD will display
This step is where you must program your input channels for
Normally Open (N.0) or Normally Closed (N.C) contact activation.
If you purchased the EC4 Emergency Caller with a
Transmitter(s), they have been programmed at the factory.
Special Note:
To Add P4S & LRT-4 Transmitters
During Step 7 – Programming Channels, the P4S & LRT-4
transmitter should match each letter corresponding to the
channel and must be set shown below:
Button A for Channel 1
Button B for Channel 2
Button C for Channel 3
Button D for Channel 4
Select 1 to enter Program Channel 1.
LCD will display
Advertisement
