Pivoting the drive bay assembly upward and downward
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove any media from the drives and turn off all connected devices and the computer. Disconnect all
power cords from electrical outlets and disconnect all cables from the computer.
2. Remove the computer cover. See "Removing the computer cover" on page 15.
3. Remove the front bezel. See "Replacing the front bezel" on page 16.
4. Pivot the drive bay assembly upward and downward.
Figure 17. Pivoting the drive bay assembly upward
.
Chapter 4
Replacing hardware
21