Lenovo V330-15IGM User Manual And Hardware Maintenance Manual page 40

1. Remove any media from the drives and turn off all connected devices and the computer. Disconnect all
power cords from electrical outlets and disconnect all cables from the computer.
2. Remove the computer cover. See "Removing the computer cover" on page 15.
3. Remove the front bezel. See "Replacing the front bezel" on page 16.
4. Pivot the drive bay assembly upward. See "Pivoting the drive bay assembly upward and downward" on
page 21.
5. Disconnect the heat sink and fan assembly cable from the system board.
6. Replace the heat sink and fan assembly.
Figure 42. Removing the heat sink and fan assembly
Figure 43. Installing the heat sink and fan assembly
36
V330–15IGM User Guide and Hardware Maintenance Manual