Replacing A Pci Express Card - Lenovo V330-15IGM User Manual And Hardware Maintenance Manual

7. Connect the new heat sink and fan assembly cable to the system board.
8. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 47.

Replacing a PCI Express card

Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove any media from the drives and turn off all connected devices and the computer. Disconnect all
power cords from electrical outlets and disconnect all cables from the computer.
2. Remove the computer cover. See "Removing the computer cover" on page 15.
3. Remove the front bezel. See "Replacing the front bezel" on page 16.
4. Pivot the drive bay assembly upward. See "Pivoting the drive bay assembly upward and downward" on
page 21.
5. Replace a PCI Express card.
Figure 44. Removing a PCI Express card
Note: If the card is held in place by a retaining latch, press the latch
Then, gently remove the card from the slot.
1 as shown to disengage the latch.
.
Chapter 4 Replacing hardware
37