Setting The Jumpers - Fujitsu SLR 50 GBYTE Operating Manual

SLR 25/50 Gbyte

Setting the jumpers

There is a jumper block on the back of the drive with 16 jumpers. These default settings depend on
the relevant system configuration.
S E LE C T
T E S T C O N N
0 1 2 3
T E S T G N D G N D P W R
The OUT, IN and TEST CONN jumpers are reserved and may not be changed.
!
Parity checking (PAR)
The drive supports the SCSI bus parity check function.
Jumper PAR inserted = Parity check enabled
Jumper PAR not inserted = Parity check disabled
English - 3
A26361-H583-Z100-1-7419