Table of Contents
Advertisement
Page 10
JP4
S1D13743
X70A-G-001-01
JP4 - IOVDD Source
JP4 is used to select the source for the IOVDD supply voltage.
When the jumper is at position 1-2, the IOVDD voltage must be provided to the H1
connector, pin 32.
When the jumper is at position 2-3, the IOVDD voltage is provided by the 3.3V power
supply of the board.
Figure 3-3: Configuration Jumper Location (JP4)
S5U13743P00C100 Evaluation Board User Manual
Revision 1.0
Epson Research and Development
Vancouver Design Center
Issue Date: 2007/08/15
Advertisement
Table of Contents
