Ilsintech SWIFT K11 User Manual page 7

CAUTIONS
Do not touch sleeve heater or protec sleeve while sleeve heater is operating or right after heating is
completed. It may incur injury due to high temperature.
Do not put Swift K11 at an unstable place. When the equipment is dropped, it incurs injury or equipment
damage.
Swift K11 should be accurately adjusted and treated in arrayal. Do not give it a strong shock, either.
Use transporting case to carry or to keep Swift K11. The transporting case keeps the equipment from
humidity, vibration and shock during storage and transportation and prevents its damage.
Replace the electrode at the right time by referring to the following.
Designated electrode should only be used.
Place a new electrode at a right position.
Replace the electrode in pairs.
Abnormal discharge is incurred when not following the aforementioned caution.
It may incur equipment damage or deteriorated splice.
Do not use any chemical other than ethyl alcohol (96% or higher) to clean object lens, V-Groove, LCD
monitor and main body.
Using other chemicals may incur deformation, discoloration or deteriorated performance.
Do not keep the equipment in environment with high temperature or high humidity. It may incur
equipment damage.
Technical aspects of Swift K11 should be inspected by a qualified expert.
When ignoring this, it may incur fire or electric shock.
Discuss with Ilsintech to use the service.
SWIFT K11-EN, Rev.A 7