Ilsintech SWIFT K11 User Manual page 6

When a damaged power cord is used, it may incur fire or injury.
Use 3-core AC power cord and do not ever use 2-core power cord, cable or plug.
Do not touch AC plug, AC power cord or sealer with wet hands. It may incur electric shock.
Do not disassemble AC adapter, battery or Swift K11. Deformation may incur fire, electrical shock or
injury.
Refer to the following when using the battery.
▪ When an improper battery which is not provided by Ilsintech is used, it may incur smoke,
damage of equipment, burn, injury or even death.
▪ Do not dispose the battery into fire or incineration plant.
▪ Do not charge the battery next to flame.
▪ Do not give an excessive shock to the battery.
▪ When the battery is not completely charged in 2 hours or green LED is not turned on, stop
charging immediately and contact to Ilsintech.
▪ Do not put anything on AC adapter during charging.
Use the exclusive AC adapter (F1-1). Do not use another AC power cord or battery. Excessive current
may incur equipment damage or injury.
Do not use Swift K11 where there is harmful gas or flammable liquid. Explosion or fire may be incurred
due to electrical discharge.
Do not use compressed air or compressed gas when cleaning Swift K11.
Inspect the case belt before transportation. When transporting case is dropped due to damage on belt,
it may incur equipment damage or injury.
Wear safety goggles when working on making splice. It is very dangerous if a piece of optical fiber gets
in skin or eye.
Do not use Swift K11 around high temperature or flame. It may incur injury
or equipment damage.
CAUTION:
HIGH TEMPERATURES
SWIFT K11-EN, Rev.A
WARNINGS
DO NOT SPRAY FREON GAS
CAUTION:
HIGH VOLTAGE
6