Ilsintech SWIFT K11 User Manual page 50

6.4.1 Splice operation
Splice operation consists of4 sub-checkboxesChecka checkbox and each function is activated.
Set value Description
Auto Splice automatically starts when closing the windbreak cover.
Pause 1 It temporarily stops after first arrayal completes.
Press
Pause 2 It temporarily stops after clad arrayal completes.
Press
Auto heater1 Heater automatically operates after splicing is finished (Wind cover
should be opened)
Auto heater2 Heater operates only when the fiber is located heater inside (left side
heater sensor should be pushed well)
SWIFT K11-EN, Rev.A
and it goes to the next step.
and it goes to the next step.
50