Table of Contents
Advertisement
5.2.2 Cutter blade rotation
When cutter fails to cut optical fiber properly, rotate the blade as follows.
i.
Unscrew the right and the left clamp screw using 1.5 hex key wrench.
ii.
Rotate the blade one gauge only with a soft cotton swab. (Blade is of 16 gauges in total.)
iii.
Tighten the right and the left clamp screw using 1.5 hex key wrench.
SWIFT K11-EN, Rev.A
28
- Quick Links:
- Cleaning and Inspection before Splice
- Setting
Hide quick links:
Advertisement
Table of Contents
