JVC AV32L5EKGY Service Manual page 28

Measuring
Item
instrument
Adjustment of Signal
generator
H. CENTER
Remote
control unit
C
Adjustment Signal
of H.SIZE generator
Remote
control unit
ASPECT MODE
H SIZE
Adjustment of Signal
EW-PIN generator
Remote
control unit
Straight
Test point Adjustment part
3.H-CENT.
D
4.H-SIZE
FULL
92%
[ HORIZONTAL SCREEN SIZE ]
6.EW-PIN
No. 51779
13. Receive a circle pattern signal.
14. Select 3.H-CENT and set the initial setting value.
15. Adjust H-CENT to make C=D .
16. Press the MENU key and memorize the set value.
17. Receive a cross-hatch signal.
18. Select 4.H-SIZE and set the initial setting value.
19. Adjust H-SIZE and make sure that the horizontal screen size
of the picture is in the bellow table.
20. Press the MENU key and memorize the set value.
21. Press the MENU key and memorize the set value.
PANORAMIC
95%
22. Select 6.EW-PIN and set the initial setting value
23. Adjust EW-PIN and make the 2nd.vertical lines at the left and
right edges of the screen straight. Also make sure that the 3rd
vertical lines are straight.
24. Press the MENU key and memorize the set value.
AV32L5EKGY
AV32L5EIGY
Description
SUBTITLE
92%
27