JVC AV32L5EKGY Service Manual page 17

AV32L5EKGY
AV32L5EIGY
(3) Setting methods
" Method of Setting 1.IF as [VCO] : It must not adjust without signal.
① 1 Key ･････････････････････････ Select 1.IF.
② 1 Key ････････････････････････ Select 1. VCO (CW)
③ INFORMATION Key ････････････ Return to the SERVICE MENU screen.
" Method of setting 2.V/C, 3.AUDIO, 4.DEF , 5.VSM PRESET and 7.PIP.
① 2 ～ 5, 7 Key ･･･････････････････ Select one from 2. V/C, 3. AUDIO, 4. DEF , 5. VSM PRESET and 7.PIP .
② FUNCTION UP/DOWN Key ･････ Select setting items.
③ FUNCTION -/+ ･････････････････ Set (adjust) the setting values of the setting items.
④ MENU (OK) Key ･･･････････････ Memorize the setting value.
⑤ INFORMATION Key ････････････ Return to the SERVICE MENU screen.
" Do not adjust 6. STATUS, 8. --- , 9. SHIPPING(OFF) and 0. BUS FREE functions .
(4) Release of SERVICE MENU
1) After completing the adjustment, return to the SERVICE MENU, then again press the INFORMATION (OK) key to return to the normal
screen.
16
Check the arrow position from the "ABOVE REF." to "BELOW REF."
The receive channel is automatically set by selecting VCO mode.
(Before storing the setting values in memory, do not press the CH, TV, POWER ON / OFF key -
if you do, the values will not be stored in memory.)
No. 51779