lopital Lotus Instructions For Use Manual page 20

Step 4
The client can now stand upright. The client can take hold of the vertical hand grips to
lever himself / herself into a standing position.
Step 5
Turn the sitting parts away. Now the client can take place on the Lotus.
Step 6
Disengage the breaks if you wish to move the Lotus (See paragraph 3.1. Wheel brakes).
Step 7
If wanted, you can move the base spreader to the narrower position by pushing the other
pedal. Roll the client towards the (wheel)chair, toilet or bed (See paragraph 3.2. Base
spreading).
Step 8
Spread if necessary the base parts of the Lotus and roll it as far as possible to the (wheel)
chair, toilet or bed.
Step 9
The Lotus must be put on the brakes before transferring persons (See paragraph 3.1.
Wheel blocking).
Step 10
Have the client stand upright. The client can take hold of the vertical handgrips to pull
himself / herself into a standing position.
Step 11
Turn the sitting parts away again. Now the client can take place on the (wheel)chair, toilet
or bed.
Step 12
Have the client take his / her feet from the footplate. Disengage the break for moving the
Lotus.
20 | Instructions for use | Lotus Active standup aid