LG 43SH7E Owner's Manual page 116

Monitor signage
Hide thumbs Also See for 43SH7E:
Table of Contents

Advertisement

61.
Multi Screen
Mode & Input (Command: x c)
Saves and controls Multi Screen modes and inputs.
Transmission
[x][c][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ][Data4]
[ ][Data5][ ][Cr]
Data 1 (Sets MultiScreen mode)
10: PIP
22: PBP2
23: PBP3
24: PBP4
Data 2 (Sets the Main input of Multi screen)
Data 3 (Sets the Sub1 input of Multi screen)
Data 4 (Sets the Sub2 input of Multi screen)
Data 5 (Sets the Sub3 input of Multi screen)
80: DVI-D
90: HDMI1
91: HDMI2/OPS
92: OPS/HDMI3/DVI-D
95: OPS/DVI-D
96: HDMI3/DVI-D
97: HDMI3/HDMI2/DVI-D
98: OPS
C0: DISPLAYPORT
Acknowledgment
[c][ ][Set ID][ ][OK/NG][ ][Data1][Data2][Data3]
[Data4][Data5][x]
* This feature may not be available for all models.
* Only the input modes supported by the model works.
* This feature operates as the last input, and supports data in
DTV format.
62.
Aspect Ratio
(Multi screen) (Command: x d)
Controls the aspect ratio of Multi Screen.
Transmission
[x][d][ ][Set ID][ ][Data1][ ][Data2][Cr]
Data1 01: Controls the Main input
02: Controls the Sub1 input
03: Controls the Sub2 input
04: Controls the Sub3 input
Data2 00: Full Screen
01: Original
Acknowledgment
[d][ ][Set ID][ ][OK/NG][Data1][Data2][x]
* This feature may not be available for all models.
63.
SCREEN OFF
(Multi screen) (Command: x e)
Turns on/off each screen in the Multi Screen.
Transmission
[x][e][ ][Set ID][ ][Data1][ ][Data2][Cr]
Data 1 01: Controls the Main input
02: Controls the Sub1 input
03: Controls the Sub2 input
04: Controls the Sub3 input
Data 2 00: Screen On
01: Screen Off
* This feature only works when the Multi Screen app is running.
* This feature does not work when there is no signal.
Acknowledgment
[e][ ][Set ID][ ][OK/NG][Data1][Data2][x]
* This feature may not be available for all models.
64.
Screen Off Always
(Command: s n, 0d)
If you activate the Screen Off Always feature, the monitor
enters Screen Off mode regardless of whether or not you have
activated PM mode.
Transmission
[s][n][ ][Set ID][ ][0][d][ ][Data][Cr]
Data
00:
Off
01:
On
Acknowledgment
[n][ ][Set ID][ ][OK/NG][0][d][Data][x]
* This feature may not be available for all models.
69

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents