LG 43SH7E Owner's Manual page 115

68
57. External Input Rotation
Sets the External Input Rotation feature.
Transmission
[s][n][ ][Set ID][ ][8][5][ ][Data][Cr]
Data 00: Off
01: 90 degrees
02: 270 degrees
03: 180 degrees
Acknowledgment
[n][ ][Set ID][ ][OK/NG][8][5][Data][x]
* This feature may not be available for all models.
58. Beacon (Command: s n, 88)
Turns on/off Beacon.
Transmission
[s][n][ ][Set ID][ ][8][8][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgment
[n][ ][Set ID][ ][OK/NG][8][8][Data][x]
* This feature may not be available for all models.
59. Brightness Scheduling
Selects a Brightness Scheduling mode.
Transmission
[s][m][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgment
[m][ ][Set ID][ ][OK/NG][Data][x]
* This feature does not work if the current time is not set.
* This feature may not be available for all models.
(Command: s n, 85)
Mode (Command: s m)
60. Brightness Scheduling
Sets Brightness Scheduling.
Transmission
[s][s][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
1. f1 to f6 (data reading)
F1: Reads the 1st Brightness Scheduling's data
F2: Reads the 2nd Brightness Scheduling's data
F3: Reads the 3rd Brightness Scheduling's data
F4: Reads the 4th Brightness Scheduling's data
F5: Reads the 5th Brightness Scheduling's data
F6: Reads the 6th Brightness Scheduling's data
2. FF: Reads all stored lists
3. e1 to e6 (Deletes one index), e0 (Deletes all indexes)
E0: Deletes all Brightness Schedulings
E1: Deletes the 1st Brightness Scheduling
E2: Deletes the 2nd Brightness Scheduling
E3: Deletes the 3rd Brightness Scheduling
E4: Deletes the 4th Brightness Scheduling
E5: Deletes the 5th Brightness Scheduling
E6: Deletes the 6th Brightness Scheduling
4. 00-17: 00 - 23 hours
Data2 00-3B: 00 - 59 minutes
Data3 00-64: Backlight 0 - 100
* To read or delete a list of quick brightness controls you have
set, [Data2][Data3] must be set to FF.
* If you want to read a complete list of quick brightness
controls you have set through FF, do not enter any values in
[Data2][Data3].
* If you want to read a complete list of quick brightness
controls you have set through FF, NG is acknowledged if there
is no stored list.
Example 1: ss 01 f1 ff ff - Reads the 1st index data from the
quick brightness control.
Example 2: ss 01 ff – Reads all index data from the quick
brightness control.
Example 3: ss 01 e1 ff ff - Deletes the 1st index data from the
quick brightness control.
Example 4: ss 01 07 1E 46 - Adds a schedule whose time is
07:30 and whose backlight is 70.
Acknowledgment
[s][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
* This feature may not be available for all models.
(Command: s s)