Installation - Boschetti Industrie Meccaniche BGMTBAX 300 Manual For Installation And Use For User And Installer

Storage gas water heater stand on commercial low nox
Table of Contents

Advertisement

Installation

Only a professional qualified technician is authorized to install the gas devices.
The installation must be carried out in conformity of:
- the current laws prescription;
- the laws in force about gas domestic installation;
- the direction for exhaust gases;
- the national and municipal laws.
Before installing the device check if it received in proper condition; in case of defects please contact the supplier.
The packaging must be kept away from children as they may be very dangerous. These parts have to be disposed
according to the local laws.
The place for the installation must respect all the condition listed in the laws in force about gas plants for domestic use
supplied by a distributing net - Projecting, installation and maintenance. A correct aeration must be guaranteed through
permanent right-dimensioned hole.
Water heater with base must mantein a distance of at least 50 mm from the adjoining walls (see pic. 1).
The floor on which the water heater will be put must be of a non flammable stuff, otherwise it must be isolated in an
adequate way. Place the water heater parallel to the floor with the aid of a level tool.
Picture 1
Distance from walls = 50 mm (A)
A
A
IT
Boschetti Industrie Meccaniche srl
5
Ver. 01/2018

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bgmbax 300

Table of Contents