Pilot's Injector Replacement - Boschetti Industrie Meccaniche BGMTBAX 300 Manual For Installation And Use For User And Installer

Pilot's injector replacement

This operation must be carried out only by a qualified staff. You have to follows these directions:
- remove the cover for gas valve and unscrew the related fixing screws;
- dismount the burners protection mask;
- loosen in sequence: the thermocouple, the valve-pilot's gas tube and the valve-burner's gas tube;
- Unscrew the fixing screws and remove the support box with burners and pilot;
- remove the pilot with relative support structure by unscrewing the fixing screw;
- loose the fitting of the valve-pilot's gas tube;
- take away the injector by slipping off the valve-pilot's gas tube;
- set the new injector in the pilot burner and fix correctly the connection;
- set all the parts by following the opposite procedure.
Picture 15
Pilot's injector replacement
Boschetti Industrie Meccaniche srl
Thermocouple
Pilot's injector
Fitting
19
Pilot
Support structure
for pilot
IT
Ver. 01/2018