Thermocouple And Pilot Burner Replacement - Boschetti Industrie Meccaniche BGMTBAX 300 Manual For Installation And Use For User And Installer

Thermocouple and pilot burner replacement

This operation must be carried out only by a qualified staff. You have to follows these directions:
- remove the cover for gas valve and unscrew the related fixing screws;
- dismount the burners protection mask;
- loosen in sequence: the thermocouple, the valve-pilot's gas tube and the valve-burner's gas tube;
- Unscrew the fixing screws and remove the support box with burners and pilot;
- remove the thermocouple or the pilot burner and replace the part;
- set all the parts by following the opposite procedure.
Picture 13
Disassembly the cover for gas valve and access to the burners and pilot group
Cover for
gas valve
Thermocouple
Boschetti Industrie Meccaniche srl
Valve-burners gas
tube
Valve-pilot's
gas tube
Burners protection mask
17
Support box for burners
and pilot group
IT
Ver. 01/2018