Maintenance And Repair; Cleaning And Care; Maintenance; Replacing Wear Parts - Bosch Rexroth 50 NFF2 Operating Instructions Manual

RE 51433-B/04.10 | 30, 50, 80 NFF2
CAUTION!
CAUTION!
CAUTION!
9

Maintenance and repair

9.1

Cleaning and care

Penetrating dirt and penetrating liquids will cause faults!
Safe function of the off-line filter system is no longer ensured.
Always provide for utmost cleanness when working at the hydraulic system.
f
Do not use a pressure washer.
f
Damage to the surface from solvents and aggressive cleaning agents!
Aggressive cleaning agents may damage the seals of the off-line filter system and
make them age faster.
Never use solvents or aggressive cleaning agents.
f
Do not use pressure washers for cleaning.
f
Damage to the hydraulic system and seals!
The water pressure of a pressure washer can damage the hydraulic system and
seals of the off-line filter system. The water displaces the oil from the hydraulic
system and seals.
Do not use pressure washers for cleaning.
f
Cover all openings with the appropriate protective caps / devices.
f
Check that all seals and caps of the plug-in connections are firmly fitted so
f
that no humidity can penetrate the off-line filter system.
Only clean the off-line filter system using a damp, lint-free cloth. Only use
f
water and a mild cleaning agent, if necessary, to do so.
9.2

Maintenance

If used as intended, the off-line filter system is maintenance-free.
9.3

Replacing wear parts

The wear parts of the off-line filter system are shown in the following figure.
Use the material numbers specified in this table for ordering the wear parts
f
from Bosch Rexroth.
Bosch Rexroth AG 19/30
Maintenance and repair