Assembly; Assembling The Off-Line Filter System - Bosch Rexroth 50 NFF2 Operating Instructions Manual

16/30 Bosch Rexroth AG

Assembly

CAUTION!
6 Assembly
6.1

Assembling the off-line filter system

6.1.1 Hydraulically connecting the off-line filter system
Firstly take the pressure tube lance out of the receiving tube and position it in
f
the container into which the purified oil is to be delivered.
Make sure that the lance is below the oil level (fig. 5).
f
Proceed with the suction tube lance in the same way; put it into the container
f
with the oil to be purified (fig. 5).
Fig. 5: lance positions
If the containers have been provided with fittings for connecting the off-line filter
system, the lances can also be disassembled and the hoses can be directly at-
tached to the containers using the corresponding fittings.
Missing seals and caps will lead to non-compliance with protection
class IP 54!
Liquids and contamination parts may penetrate and damage the product.
Ensure before the assembly that all seals and caps of the plug-in connections
f
are tight.
30, 50, 80 NFF2 | RE 51433-B/04.10