Table of Contents
Advertisement
1. SAFETY & ENVIRONMENTAL INFORMATION
About this chapter
Read this chapter attentively. It contains important information to prevent personal injury while installing the R-series LED screen.
Furthermore, it includes several cautions to prevent damage to the R-series sheets. Ensure that you understand and follow all safety
guidelines, safety instructions and warnings mentioned in this chapter before installing the R-series sheets. After this chapter, addi-
tional "warnings" and "cautions" are given depending on the installation procedure. Read and follow these "warnings" and "cautions"
as well.
Clarification of the term "R-series" used in this document
When referring in this document to the term "R-series" means that the content is applicable for following Barco products:
•
R7
•
R10
Clarification of the terms "LED sheet", "LED product", "LED screen" and "LED board" used in this
document
The certification / safety marks only cover the R-Series products with its contents described hereunder. Additional optional
parts are not part of the R-series product certifications
An R-Series LED sheet is a thin sheet with a visible LED area of 26 or 52 cm wide and maximum 468 cm long. An LED sheet also
contains 1–2 termination box(es) and 1–2 connection box(es), depending on the width of the LED sheet. An LED sheet of 26 cm
wide has 1 of both termination and connection box; an LED sheet of 52 cm wide has 2 of both termination and connection boxes.
Because of the variable length and width of a LED sheet, it can contain from 1 up to 24 LED boards. Each LED board is approxi-
mately 26 cm wide and 39 cm long. A LED sheet can be up to 12 LED boards high (12 x 39 cm = 468 cm) and up to two LED boards
wide (2 x 26 cm = 52 cm).
An R-Series product can consist of an R-Series LED sheet and one or two power supply units (PSUs), depending on the width:
•
One LED board wide: one PSU (see example B, image 1-1)
•
Two LED boards wide: two PSUs (see example C)
Because it is paper thin, multiple R-Series products linked together form an LED screen instead of a "wall" (See example A).
A
Image 1-1
A
Example of an R-Series LED screen, consisting of 2 R-Series products (here split with a green line).
B
Example of R-Series product of 1 LED board wide and 12 LED boards high.
C
Example of R-Series product of 2 LED boards wide and 12 LED boards high.
1
LED sheet containing a number of LED boards, 1–2 termination box(es) and 1–2 connection box(es).
2
PSUs
R5906040 R-SERIES 16/02/2017
B
C
1
1
2
2
1. Safety & Environmental Information
1
Advertisement
Table of Contents
