Digital Systems Tytan GPS Pager DS511 User Manual page 29

m1, m2, m3
parameter for activating or deactivating the operation with mobile
application Tytan GPS , '1' enables application, '0' disables application,
important – if this parameter is set to '1' the SMS notification (accordingly s1, s2
or s3) must be also set to '1' in order to the application Tytan GPS to run properly.
DS511 sends a return SMS to confirm:
DSPIN set: {new DSPIN} number of mobile phones:
{number of mobile phones}
{first phone number} resend:{yes/no} call:{yes/no}
sms:{yes/no} app:{yes/no},
{second phone number} call:{yes/no} sms:{yes/no}
app:{yes/no},
{third phone number} call:{yes/no} sms:{yes/no}
app:{yes/no}
e.g.:
12345 setgsm 54321 54321 3 +44501123456 1 1 1 0 +44502123456 0 1 0
+44503123456 0 1 1
Above example sets new DSPIN to 54321 and 3 mobile phone numbers. These
numbers will be notified after the alarm trigger. First mobile phone number will
be notified by voice call and SMS, second number just by SMS, third number by
SMS and operation via mobile application Tytan GPS .
The DS511 confirms change of the settings by return SMS:
DSPIN set: 54321 number of mobile phones:3
+44501123456 resend:yes call:yes sms:yes app:no,
+44502123456 call:no sms:yes ap:no,
+44503123456 call:no sms:yes ap:yes
READING PHONE NUMBERS AND GSM SIGNALISATION MODE
Command allows to check mobile phone numbers and GSM configuration
saved in the device:
{DSPIN} readgsm
e.g.:
12345 readgsm
Sends SMS with information analogous to setgsm, that is:
GSM config:
DSPIN: {DSPIN} number of mobile phones:
{number of mobile phones}
{first phone number} resend:{yes/no} call:{yes/no}
sms:{yes/no} app:{yes/no},
{second phone number} call:{yes/no} sms:{yes/no} app:{yes/no},
{third phone number} call:{yes/no} sms:{yes/no} app:{yes/no}
REMOTE CHECK OF VEHICLE AND DEVICE STATE
The system allows to check the vehicle and device state remotely by simple SMS
command:
{DSPIN} status
e.g.:
12345 status
The device sends a return status SMS with information about the vehicle and
state of VSS. This status SMS can be sent as simple or full form.
In specific case when DS511 works as PAGER to 3rd party VSS, which does not
allow to get the information about alarm state, the SMS is sent only in simple
form. Both forms of status SMS contain information about DS511 version and
®
®
27
®
DS511 PAGER
EN