Extending Schedules; Output Schedules - Digital Monitoring Products XT INTERNATIONAL Series User Manual

3. The keypad displays SUN MON TUE WED. Press CMD to
show the remaining days of the week and then select the
start day.
4. At OPENING TIME?, press CMD. The keypad now displays
MON – : AM PM. Enter the time you want the burglary
protection to be turned off. Use a 12-hour clock only
(12:00 to 11:59). Select AM or PM.
5. At CLOSING TIME?, press CMD. The keypad then displays
MON – : AM PM. If you want the schedule to be for
consecutive days, select MON to increment the days of the
week. When the correct day is shown, enter the time you
want the burglary protection to turn on.
6. To clear a schedule, press DELETE and then AM when the
opening time is requested. Press the back arrow to exit
the User Menu.

EXTENDING SCHEDULES

User Code Level: Master
This option allows users to extend today's programmed closing
time schedule.
Extending a Closing Schedule
1. Access the User Menu.
Press CMD until SCHEDULES? displays. Press any select key
2.
or area.
3. The keypad displays PRM EXT OUT FAV. Select EXT.
The keypad displays – : AM PM. Enter in the new time for
4.
the closing schedule to expire.
42

OUTPUT SCHEDULES

User Code Level: Master
Output schedules allow you to create a schedule for each of the
four outputs connected to your system.
Setting Output Schedules
1. Access the User Menu.
Press CMD until SCHEDULES? displays. Press any select key
2.
or area.
3. The keypad displays PRM EXT OUT FAV. Select OUT.
At the OUTPUT NO: – display, enter the output number
4.
you want to program. Press CMD.
The keypad displays SUN MON TUE WED. Press CMD to
5.
display THU FRI SAT.
6. Select the day you want to program.
Note: After selecting the day of the week for the schedule
to occur, the keypad displays any currently programmed
ON OFF times previously set for that day. This feature
allows you to review programmed schedules at any time.
If ON OFF times display, the keypad then displays DELETE
7.
KEEP. Select DELETE to enter new times.
The keypad then displays ON TIME?. This is followed by
8.
the display – : AM PM.
XT Series International User Guide User Menu