Table of Contents
Advertisement
7.2 Operation
7.2.1 Place PVC or aluminum profile that you are going to process on to
the table (FIGURE 3 NO.88). Fix it with clamps (FIGURE 3 NO.24) on
the table.
7.2.2 The forward/ backward and upward/ downward position of the
clamps can be adjusted by special squeezing tools (FIGURE 3
NO.3UA040030-0002). The control of pneumatic clamp is
provided by the button on the chassis
7.2.3
Mark the locations of lock, door handle, hinge etc on the pattern
(FIGURE 2 NO.2TU011441-0965) which is over the machine.
Place automatically the spring pin (FIGURE 2 NO.3UA810030-0017) to the hole to be processed on the pattern
by rotating the related button (T1
7.2.4
7.2.5 Forward and backward motion of spring system (FIGURE 2
NO.3UA810030-0017) can be adjusted by special squeezing
part (FIGURE 4-5 NO. 3UA040030-0003).
7.2.6 Enable
T2
T3).
-1007).
Advertisement
Table of Contents
