Colebrook Bosson Saunders Loop CPU/012 Nstallation Instructions

P A R T S I N C L U D E D :
Allen
Key
C P U D E S K F I T T I N G S U P P L I E D S E P E R A T E L Y
WA R N I N G
M A I N T E N A N C E A N D I N S P E C T I O N
• Ensure all screws and fixings are fully tightened and occasionally re-tighten if necessary.
• Clean with a dampcloth. DO NOT use solvents.
C P U - 0 1 2 - I N S T - B - S E P T 2 0 1 7

Installation Instructions

for Loop CPU holder
C P U / 0 1 2
C P U / 0 1 2
Loop CPU
Holder
D I S C L A I M E R
• The use of power tools, lever bars or excessive force during the installation, or
reconfiguration of the product will invalidate your guarantee.
• Failure to observe the recommendations in the use, and configuration of these products
may affect your guarantee.
• As part of Colebrook Bosson Saunders ongoing product improvement programme, the
design of products may change without prior notice and details may vary from those illustrated.
P A T E N T S
Colebrook Bosson Saunders hold a number of patents and other
intellectual property rights covering our products and processes.
You can find patent information on our website at:
www.colebrookbossonsaunders.com/patents
500
240
MAX
80 225
Min/Max CPU Dimensions
M8
Locknut
Keyed metal
washer
Nylon
washer