Rail Installation - Fortinet FortiTester 2000E Quick Start Manual

Do NOT place heavy objects on the unit.

Rail Installation

2
To install the FortiTester unit using the rail mounted kit:
1. To remove the chassis (inner) member, pull the slide open, and then
press the trigger down as shown on the drawing, and pull the chassis
(inner) member out.
Pull chassis (inner) member out
2. Use the standoffs to mount the chassis (inner) member to the chassis.
3. To attach the cabinet (outer) member of the rail, first ensure that the
safety lock is in the unlocked position. Then, insert the stag into the
upper and lower square holes on the EIA rail from the back of the rail.
Finally, push the safety lock forward to secure the bracket.
7
Press trigger down to release