Installation - Fortinet FortiGate Quick Start Manual

Installation

A
1. Ensure that you are properly grounded.
2. Remove the cap from the
3. Position the SFP transceiver
correctly oriented. When the
the socket latch.
SFP cage socket orientation may vary. Ensure that the SFP transceiver is correctly oriented
Note:
each time that you are inserting a transceiver.
4. Hold the sides of the
5. Press the transceiver
6. Verify that the transceiver
to pull it out without lowering the
If the transceiver cannot be removed, it is installed and latched correctly.
If the transceiver can be removed, reinsert it and press harder with your thumb.
If necessary, repeat this process until the
8
SFP cage socket on the front panel of the unit.
in front of the cage socket opening
transceiver is correctly oriented, the
SFP transceiver and slide it into the
firmly into the cage socket with your thumb.
is latched correctly by grasping the sides of the
extraction lever.
transceiver
and ensure that the
extraction lever will be level with
cage socket until it clicks into place.
transceiver
is securely latched into the cage
transceiver is
and trying
socket.
.