Fortinet FortiTester 2000E Quick Start Manual page 13

Terminal Emulation
B
Console Port
To connect to the CLI
Requires: Terminal emulator such as PuTTY, Tera Term, or a terminal server.
1. Connect the appliance console port to the management computer using the
provided console cable.
2. Start a terminal emulation program on the management computer, select the
COM port, and use the following settings:
Baud Rate: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: None
3. Press Enter on your keyboard to connect to the CLI.
4. Login using username
configuring your device.
Get started by typing
Begin typing a command then type
For example config ?
13
admin and no password. You can now proceed with
? for a list of available commands.
? for a list of available ways to complete.
shows the lowest level of configuration options.
Serial Port