Memory Operations; Memory Channel Entry - Kenwood TS-940S Instruction Manual

6. MEMORY
OPERATIONS~~~~~~~~~~~
The TS-940S provides 40 memory channels in 4 groups of 10 memories each. A MEMORY BANK switch is provided, un-
der the sliding top cover, to select the desired memory bank. The Main Display shows which of the 1 0 memories has been
selected in each group. The TS-940S stores both frequency and mode.
6-1. MEMORY CHANNEL ENTRY
1. Select the desired memory bank using the MEMORY
BANK switch on the top panel.
2. Select the desired operating frequency and mode us-
ing any desired method.
3.
Press and hold the M.IN key.
4. Press the desired memory channel number using the
number printed over the BAND/KEY switches as a
guide.
For example, to store 14.250.0 into memory channel
25:
1. Select the second group of memories by placing the
MEMORY BANK switch to 2.
2. Press the 14 MHz BAND switch.
3.
Use the Main Tuning Dial to select 14.250.0 MHz.
4. Press and hold the M.IN key.
5. Press the [5/14 MHz] key to store the frequency in
memory. A beep will sound to confirm data entry.
6. Release the M.IN key.
Note:--------------------------------------
lf the display indicates MEMO (A or B) you will not be
able to enter a memory channel. You must first select
VFO operation by pressing the VFO/M switch.
Top cover section
I---+--
MEMORY
BANK
Switch
MEM08
ILI""1'-MMrt n
I I•
C' :J
Ll.
Lf U
kHz
Lf
D
kHz
0 100 200 300 400 500 600 700 800 900 1000
111111111111111111111111 tiiiiiiiUIIIIIIIIIIIIIIIIII
+
If the main display indicates MEMOR A
or B press the VFO/M switch.
VFO-A
IH-:JOMMr'f
1 - , , - 1
f
1,
1:
Q '-'· '-'
Lf
kHz 1.....1
u
kHz
0 I 00 200 300 400 500 600 700 800 900 1000
llllttllllllttllltiU11111111111111111111111IIIIItll
Front panel
VFO/M switch M. IN switch
~
TFOANSCEIVER TS-9405
"0""'
~~~.;~ ~
~
G
~:~~ ~~~w
Main tuning control
BAND/KEY (1 -0)
31