Sub-Display Function; Setting The Clock - Kenwood TS-940S Instruction Manual

7. SUB-DISPLAY
FUNCTION~~~~~~~~~~~
The Sub-Display provides four different types of information:
(1) Timer
(2) Graph
(3) Frequency
(4) Antenna Tuner Status
Items (1 ), (2), and (3) can be selected by pressing the CLOCK, GRAPH, or SCROLL switches respectively. Item (4) however,
is selected whenever the Antenna Tuner function has been activated.
7-1. SETTING THE CLOCK
The Clock is programmed with the SET, GRAPH,
SCROLL, and CLOCK keys. The clock is a 24 hour
clock.
Setting the Current time:
Example: Setting the clock to 12 : 00.
( 1 )
off
1. Press the CLOCK key to select the clock display.
(2)
8 : 30
0 : 00 on 0: 00
2. Press the SET switch to prepare the clock for set- . - - - - - - - - - - - - - - - - - - - - - - - - ,
ting. A flashing '?" will appear on the upper clock
8 ? 30
position, as shown in figure (2).
3. By pressing the GRAPH key you can program the
Off 0 : 00 on
"Hours" position. Each time the GRAPH key is
pressed the hour will advance by 1. Pressing and
holding the key will cause the hours digits to count
up sequentially. Use the SCROLL switch to set the
minutes. Going past 59 minutes will not cause the
hours digit to increment.
4. You may synchronize the time with a time standard
by pressing the SET switch to "Zero" the seconds.
(Seconds are not displayed.)
5. If you wish to clear the Timer displays on the lower
row, press the CLOCK switch to move the flashing
'?" to the lower left time display, as shown in (5).
Then press and hold the SET switch for a few se-
conds.
(3)
off
(4)
off
(5)
off
12? 00
0 : 00 on
12? 00
0 : 00 on
12 : 00
0? 00 on
12 : 00
0 : 00
0: 00
0 : 00
0: 00
35