Fm Operation - Kenwood TS-940S Instruction Manual

3-6. FM OPERATION
TOP COVER SECTION
)
CAR M M I C l - - - - - - f - - - 1
LEaVEL GAIN UB OISP. MEMORY
. · : . . ;
coer~·
.
~
FM MIC GAIN (microphone gain)
control (j)
Used to adjust microphone amplifier
gain.
RECEPTION
[ ] Turn on the power.
ATT (RF attenuator) switch
Inserts 10, 20, or 30 dB of attenuation
t - - - - - - - - - ,
into the receiver antenna circuit, to pro-
tect the RF amplifier and mixer circuits
from distortion caused by excessive
input signal levels.
MONI (monitor) switch
®----1--~11--~::!A,
Allows monitoring of your transmitting
signal.
PWR (RF power) control G)---,
Controls the transmit power in SSB,
CW and FM modes. Clockwise rotation 1 - - - - - - - - - - - - - - - '
increases power output.
(l]
The meter lamp lights and a frequency is shown on
the display.
@]
Set the MODE to CW.
[!]
Select the desired band by operating the BAND/KEY
switch or with the 1 MHz step switch.
~
Adjust audio volume with the AF (audio gain) control.
[§]
Adjust the main tuning control so that the desired sig-
nal may be clearly heard.
14
F UXK V~O.t, Vf08 . .