Table of Contents
Advertisement
Available languages
Available languages
head to your teeth before switching on the
handle (picture
2
). When brushing your
teeth with one of the Oral-B oscillating-
rotating brush heads guide the brush head
slowly from tooth to tooth, spending a few
seconds on each tooth surface. With any
brush head start brushing the outsides, then
the insides and finally the chewing surfaces.
Brush all four quadrants of your mouth
equally (picture
3
). You may also consult
your dentist or dental hygienist about the
right technique for you.
In the first days of using any electric tooth-
brush, your gums may bleed slightly.
In general, bleeding should stop after a few
days. Should it persist after 2 weeks, please
consult your dentist or dental hygienist.
If you have sensitive teeth and/or gums,
Oral-B recommends using the «Sensitive»
mode (optional in combination with an
Oral-B «Sensitive» brush head).
Smart Ring features
Your toothbrush is equipped with a Smart
Ring (2) that has various functionalities
indicated via different colors of light:
White (default) = Operating and visual timer
light (choose individual color via Oral-B
App settings)
Red = Pressure sensor light
®
Blue = Bluetooth
Timer
The timer signals with a short stuttering
sound and a flashing light of the Smart Ring
at 30-seconds intervals to move to the next
quadrant of your mouth (picture
stuttering sound and a flashing light indicate
the end of the professionally recommended
2-minute brushing time.
The timer memorizes the elapsed brushing
time, even when the handle is briefly
switched off during brushing. The timer
resets if pausing longer than 30 seconds,
briefly pressing the mode button (4) during
pause or placing the handle on the
plugged-in charger.
Note: During the use of the Oral-B™ App,
the timer may be deactivated for some fea-
tures.
Note: You can also customize the timer set-
tings via Oral-B
™
App.
pairing indicator
3
). A long
Pressure sensor
If too much pressure is applied, the Smart
Ring (2) will light up in red, reminding you to
reduce pressure. Constant high pressure for
more than 5 seconds is indicated with a fast
flashing Smart Ring (2). In addition, the pul-
sation of the brush head will stop and the
oscillation movement of the brush head will
be reduced (during «Daily Clean», «Pro
Clean» and «Sensitive» mode) (picture
Periodically check the operation of the pres-
sure sensor by pressing moderately on the
brush head during use.
Note: During the use of the Oral-B™ App,
the pressure sensor may be deactivated for
some features.
Brushing modes
Your toothbrush offers different brushing
modes indicated on the brushing mode
display (6) on your handle («Daily Clean»
mode does not illuminate on the brushing
mode display):
«Daily Clean»
«Pro Clean»
™
«Sensitive»
«3D White»
«Gum Care»
«Tongue Clean» – Tongue cleaning for
When operating the «Tongue Clean» mode,
we recommend using the «Sensitive» brush
head. You can brush your tongue either with
or without toothpaste. Brush the whole area
of your tongue systematically in gentle
movements. The recommended brushing
time is 20 seconds; indicated with a flashing
light of the Smart Ring.
Your toothbrush automatically starts in the
mode selected last. To switch to other modes,
successively press the mode button during
use (picture
– Standard mode for daily
cleaning
– For an extraordinary
clean feeling (operated
with a higher frequency)
– Gentle, yet thorough
cleaning for sensitive
areas
– Polishing for occasional
or everyday use
– Gentle massage of
gums
occasional or everyday
use
4
). To return from any mode
3
).
Hide quick links:
Advertisement
Table of Contents
