Important Information; Description; Charging And Operating; Using Your Toothbrush - Braun Oral-B GENIUS X Manual

Hide thumbs Also See for Oral-B GENIUS X:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
• Clean brush head properly after each use
(see «Cleaning recommendations» para-
graph). Proper cleaning ensures the safe
use and functional life of the toothbrush.

Important Information

• Your Oral-B toothbrush can be used with
your smartphone (find details under
«Connecting your toothbrush to your
Smartphone»).
• To avoid electromagnetic interference
and/or compatibility conflicts, deactivate
Bluetooth on your toothbrush handle (5)
before using it in restricted surround-
ings, such as aircrafts or specially
marked areas in hospitals.
• Deactivate Bluetooth by simultaneously
pressing the on/off (3) and mode but-
ton (4) for 2 seconds until the Bluetooth
indicator (7) goes off. Follow the same
procedure to reactivate Bluetooth again.
• Persons with pacemakers should always
keep the toothbrush more than six inches
(15 centimeters) from the pacemaker
while turned on. Anytime you suspect
interference is taking place, deactivate
Bluetooth.

Description

1
Brush head
2
Smart Ring
3
On/off button
4
Brushing mode button
5
Handle
6
Brushing mode display
®
7
Bluetooth
indicator
8
Charge level display
Accessories (depending on model):
9
Basic charger (with fixed cord)
10
Brush head holder
11
Brush head compartment with protec-
tive cover
12
Charging travel case
12a Charge indicator light
12b USB port
12c Smart plug port
12d Inner lid (with smartphone holder)
12e Removable inlay
13
Smart plug (power supply)
14
Charging stand (with detachable
cable)
15
Beauty bag
16
Basic travel case
17
Charger pouch
Note: Content may vary based on the model
purchased.
Specifications
For voltage specifications refer to the type
plates/bottom of devices.
Noise level: 68 dB (A)

Charging and Operating

Your toothbrush has a waterproof handle, is
electrically safe and designed for use in the
bathroom.
• You may use your toothbrush right away
or charge it briefly by placing it on the
plugged-in basic charger (9) or charging
stand (14). When using the charging stand
(14) use the extra smart plug (13) pro-
vided (picture B). Only the smart plug may
be used for all global mains voltage
ranges (100 -240V).
Note: In case the battery is empty (no
lights illuminated on charge level display
(8) while charging or no reaction when
pressing the on/off button (3)), charge at
least for 30 minutes.
• The charge level is indicated on the
charge level display (8). Flashing lights
indicate that the battery is charging
(picture
1
); once it is fully charged, the
lights turn off. A full charge typically takes
12 hours and enables at least 2 weeks of
regular brushing (twice a day, 2 minutes).
Note: At a very low charge level, the lights
might not flash immediately; it can take up
to 30 minutes.
• If the battery is running low, a red light is
flashing on the charge level display and
the motor is reducing its speed. Once the
battery is empty, the motor will stop; it will
need at least a 30-minute charge for one
usage.
• You can always store the handle on the
plugged-in charging unit to maintain it
at full power; a battery overcharge is pre-
vented by device.
Note: Store handle at room temperature
for optimal battery maintenance.
Caution: Do not expose handle to tem-
peratures higher than 50 °C.

Using your toothbrush

Brushing technique
Wet brush head and apply any kind of tooth-
paste. To avoid splashing, guide the brush

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents