Samson BR 26l Operating Instructions Manual

Declaration of Conformity as per Directive 2014/68/EU
The manufacturer Pfeiffer Chemie-Armaturenbau GmbH, 47906 Kempen, Germany
Multi-port ball valves BR 26l, BR 26t, BR 26v and BR 26x
with packing
declares that:
• with lever
1. The valves are pressure accessories within the meaning of the Pressure Equipment Directive 2014/68/EU and
conform with the requirements of this Directive,
2. They may only be operated observing the operating instructions <BA26l-02> delivered together with the valve.
(See section 2.3 for ball valves intended for dead-end service)
Applied standards:
AD 2000 Regulations
Type designation and technical features:
Pfeiffer data sheet <TB26l>
NOTE: This Manufacturer's Declaration applies to all valve types listed in this catalogue.
Applied conformity assessment procedure:
Conforming to Annex III of the Pressure Equipment Directive 2014/68/EU, Module H
Name of notified body:
TÜV Rheinland Service GmbH
Am Grauen Stein
51101 Köln
Germany
These Declarations become invalid when modifications are made to the ball valves and/or assemblies that affect the technical
data of the ball valve or the <Intended use> described in section 1 of the operating instructions, and considerably change the
valve or an assembly delivered with it.
Kempen, 1. August 2017
1 of 9
Specifications subject without notice
Edition: August 2017
T R A N S L A T I O N
Regulations for pressurized valve body parts
Marcus Miertz, Chief Executive Officer
Identification number of the notified body:
0035
Stefan Czayka, IMS Representative
Operating instructions BA 26l-02_EN