Cross-References; Safety; Installation Requirements; Preparations For Installation - ABON Ultra S Installation And Operating Instructions Manual

English

Cross-references

In the text part cross-references to the
installation scheme are represented as
follows:
[12] = Image number, e.g. 12.
[21-]= Image number, e.g. 21 and sub-
sequent images.
(21) = Position number, e.g. 21

Safety

For the safety of individuals it is
essential to observe any instruction
of this instruction manual. Preserve
both instructions (text part and image
part) as well as the instructions for
accessories close at hand for future
use.
The door drive is designed and built ac-
cording to state of the art technology and
approved safety rules. However, during
its use, hazards to persons or impair-
ment to properties might occur.
Unplug mains plug before beginning any
works at the door drive.
Rebuilding and changes of the door
drive are not permitted for safety and
warranty reasons.
Before activating control equipment (e.g.
transmitter, buttons) make sure that no
persons, animals or objects are in the
range of movement of the door. Make
sure that unintentional or inattentive op-
eration, e.g. by playing children, is ex-
cluded.
If a slip-door is built-in in the garage
door, a safety device has to be installed,
which blocks operation of the door drive
as long as the slip-door is open.
Before door drive installation it has to be
checked that the door is easily moveable
by hand and that the door mechanics
are in working order.
The drive must not be used for unadjust-
ed doors, because the drive construction
is not designed for this application.
In the case of the door being equipped
with weight balancing in form of steel
springs, their correct functioning has to
be ensured.
Adjustments and repairs must be per-
formed by the responsible customer
service of the doors manufacturer only –
never try this yourself (danger of injury
by springs under tension).
In connection with installing the door
drive to the door, the instructions of the
door manufacturer have to be observed
too.
46

Installation requirements

Only authorized electricians are
allowed to carry out work on the elec-
trical equipment.
Technical knowledge and craftsmanship
are required for installation of this drive.
The installation of door drive must be
performed in dry rooms only.
The clearance between the garage ceil-
ing and the highest point of the opened
door must be at least 50 mm.
The door must be activated by horizontal
pulling force or pressure force. The re-
quired pulling/pushing force must not ex-
ceed 150 N.
The mounting points on ceiling, wall or
lintel and door have to ensure a safe
mounting of door drive. If required, addi-
tional constructive measures (suspend-
ed ceiling, staying, cross supports, rein-
forcements) have to be carried out.
Have an earthed socket 230 V, 50 Hz in-
stalled about 10-50 cm beside the later
mounting position of the drive head. For
constructive security see technical data.
The mechanical components of the drive
should comply with standards EN 12 604
and EN 12 605.
During installation of door drive to the
door, compliance with standards
EN 12 453, EN 12 445 and EN 12 635,
during installation of additional safety
equipment (light barrier, optical sensor,
safety strip) with the standard EN 12 978
have to be ensured.
In case of garages with no second ac-
cess, an external emergency button is
required. It is, if required, to be ordered
separately.
ABON should not be held liable for tech-
nical inadequacies of the door con-
cerned, nor for structural deformation
during use, as well as in case of inade-
quate repairing of the door.

Preparations for installation

Wrong installation might cause
serious injuries. Observe all installa-
tion instructions of this instruction
manual.
Check and adjust function and
easy operation of door before door
drive installation. The spring tension
has to be adjusted in a way, that the
door can easily be opened and closed
by hand and runs continuously and
smoothly.
Take mechanical door locking out of use.
Unpack door drive and accessories;
check completeness of delivery. Keep
packaging for returning in case of repair.
Store packaging material (e.g.
plastic) out of reach of children.
For the packaging of door drive,
only reusable materials have been used.
Please dispose of accumulated packag-
ing material according to the country-
specific regulations.

Tools

[1] Keep displayed tool ready.

Delivery

[2-3] See installation scheme (image
part).