Table Of Contents; Introduction; Ec Conformity Declaration; Intended Application - ABON Ultra S Installation And Operating Instructions Manual

Table of contents

Introduction ......................................... 45
EC conformity declaration ................... 45
Intended application ............................ 45
Storage ............................................... 45
Directions, remarks ............................. 45
Cross-references ................................ 46
Safety .................................................. 46
Installation requirements ..................... 46
Preparations for installation ................ 46
Tools .................................................... 46
Delivery ............................................... 46
Drive assembly ................................... 46
Adjusting tension of drive belt ............. 47
Installation ........................................... 47
Door connection .................................. 47
Control components ........................... 47
Putting door drive into operation ......... 47
Basic settings (learning of
end positions and forces) .................... 47
Checking obstruction safeguard ......... 48
Operation ............................................ 48
Hand-held transmitter operation ......... 48
Terminal configuration ........................ 49
Additional settings ............................... 49
Additional safety connections ............. 49
Technical data .................................... 50
Noise emission level ........................... 50
Search/elimination of malfunctions ..... 50
Maintenance ....................................... 50
Repair.. ................................................ 51
Customer service ................................ 51
Accessories ......................................... 51
Spare parts ......................................... 51

Introduction

This instruction (text part) is to be used
together with the installation scheme
(image part). Read and observe text and
image part carefully before installation
and putting into operation.
Depending on which accessories have
additionally been ordered, further in-
structions are to be observed. These are
enclosed in the regarding accessory
sets.
EC conformity
declaration
According to the EC machine guideline
98/37/EC, we hereby declare, that the
subsequently designated product com-
plies with the relevant basic EC guide-
lines because of its design and construc-
tion and in its configuration, as we put it
in circulation. This declaration loses its
validity in case of changes to the prod-
uct, which are not agreed by us.
Door drives are components for installa-
tion to garage doors, and are considered
as machines in the sense of EC machine
guideline 98/37/EC because of that.
The putting into operation is prohibit-
ed until the compliance of the final
product with this guideline has been
certified.
Product description
Electromechanical garage door drive
Manufacturer
ABON
Antriebe und Sicherheitssysteme GmbH
Thalbach
D-85368 Wang
Germany
Model
Ultra S
Applied relevant EC guidelines
EC Machine Guideline 98/37/EC
EC Low Voltage Guideline (72/23/EEC)
EC Guideline Electromagnetic Compati-
bility (EMC) (89/336/EEC)
EC Construction Product Guideline
(89/106/EEC)
Applied harmonised standards
EN 12 453, EN 12 445, EN 12 978,
EN 55 014-1, EN 55 014-2,
EN 60 335-1:2001,
EN 60 335-2-95:2001, EN 60 335-2-103
Approval
This door drive is approved according to
EN 60335-2-95. This approval is valid
only in case of use according to its in-
tended purpose and for the drive of
doors that are inspected according to
EN 12453/ EN 12445 and listed in the
annex of this installation and instruc-
tion manual as well (01.05.2005 → → → → → ).
Wang, 10 th March 2005
(Hermann Leppert, Managing Director)

Intended application

Application according to intended
purpose
The door drive is intended for opening
and closing of single or double garage
doors in the private sector only.
Any use that exceeds the aforemen-
tioned is considered as not in accord-
ance with the intended application. The
manufacturer should not be held liable
for damages resulting from such use.
Improper application
It is prohibited to use the door drive for:
- Commercial or industrial use
- Atmospheres at risk of explosion
- Garage doors with more than 2.25 m
door height
- Automatic operation
- Use for more than one household.

Storage

The door drive, whether in packaged or
loose state, has to be stored in a closed,
dry room. The storage temperature must
not fall below -20°C and must not ex-
ceed 80°C.

Directions, remarks

Important directions and remarks are
highlighted by:
CAUTION
To be found in connection with working
or operating procedures that have to be
observed accurately, in order to exclude
danger to persons.
ATTENTION
Includes information that has to be ob-
served in order to prevent damage on
the device.
NOTE
Stands for technical requirements that
have to be particularly observed.
English
45