Table of Contents
Advertisement
PUSH TYPE APPLICATIONS
INSTALLATION INSTRUCTIONS
WARNING: Ensure that 115VAC
power is OFF before touching wires.
Step #4:
Pull conduit and external
component wires through frame and cutout
in mounting plate. Allow at least 10 inches
of exposed wire for electrical connections.
Step #5:
Mount the door operator to the mounting plate with four M8x25 screws and washers provided.
Note: Mount the operator with the power switch end cap toward the door hinge.
6
WALL
CONDUIT
FRAME
DOOR
END OF CONDUIT MUST
NOT PROTRUDE PAST
THE SURFACE
DOOR
OPERATOR
PUSH ARM
WHITE (+)
BLACK (–)
GREEN (GND)
MOUNTING
PLATE
DOOR
FRAME
EXTENSION ARM
DOOR ARM FOOT
MOUNTING
PLATE
Advertisement
Table of Contents
