Advertisement
Precautions during transportation
● This product can be transported using a general elevator (if transporting with an
elevator is not possible, use a rope as stated below)
How to transport the product using a rope
● When carrying the indoor unit by lifting it using a rope, pass the rope through the 4
holes located at each leg of the product.
● You must pass the rope through 4 holes to prevent impact on the product before lifting
it.
● When connecting the rope to the indoor unit, the angle should be less than 40°.
● If the rope comes into contact with the casing, place a plate on the casing or wrap the
indoor unit with a cloth to prevent damages to the product.
A ≤ 40˚
● Transport the product with care.
● A product with a weight of over 20kg should be carried by at least 2 people.
Warning
● The plastic packing bag should be torn into pieces when disposing of it so
that children do not play with it. If a child puts the plastic bag over his or her
head while playing with it, this may cause suffocation.
● You must carry the indoor unit using the 4-point support method, as shown in
the figure above. Carrying the indoor unit using a 3-point support method is
not that stable and may cause the indoor unit to fall off the rope.
● When carrying the product using a forklift, be careful not to let the product fall
off the forklift while driving it.
● Do not lift the product using the refrigerant pipe or water pipe.
This may damage the pipes.
A
Assistant (Rolling prevention)
23
Installation Manual
Advertisement
