Advertisement
Installation
Warning
When using anticorrosive agent, please observe the following:
① Do not mix with oxidizing agent.
② Keep away from heat, flame, spark or other ignition sources.
③ A person who is not aware of the hazardousness of anticorrosive agent must not
handle or distribute anticorrosive agent.
④ Keep out of reach of children or the elderly.
⑤ Do not use the empty container of anticorrosive agent for other purposes.
⑥ Dispose of or return the empty container or vessel of anticorrosive agent to your
nearest dealer.
⑦ Rinse the empty container 3 times or more with water.
⑧ Be careful not to inhale, consume or allow your eyes or body to come into contact with
anticorrosive agent as it has hazardous and dangerous characteristics as specified in
the Article 41 of the Industrial Safety and Health Act.
How to use anticorrosive agent
① After installing the boiler, shake and fill the anticorrosive agent into the boiler before
filling water.
② Rinse the anticorrosive agent container with water.
③ The use life of anticorrosive agent is 1 year (refill it once a year).
④ Fill anticorrosive agent after installing the domestic hot water tank. When refilling
anticorrosive agent, close the water supply valve and open the drainage valve to
discharge the water in the tank, fill anticorrosive agent and then open the water supply
valve to fill with water.
When installing a remote controller
Warning
① You must call the authorized service center or a professional installation agency for
installation.
- Poor installation may cause a fire, electric shock, explosion or damage.
② Contact the authorized service center or a professional installation agency to reinstall
the installed product.
- Poor installation may cause a fire, electric shock, explosion or damage.
③ Do not disassemble, repair or modify the product arbitrarily.
- This may cause a fire or electric shock.
11
Installation Manual
Advertisement
